We have unearthed this great article on What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and decided it made perfect sense to relate it with you on this site.
Numerous modern-day residences make use of an electric water heater for their heater, as a result of its convenience and simplicity of use. Nevertheless, similar to any other electric appliances, problems may emerge with its use, unexpectedly. It can be actually frustrating to awaken to a cool shower as opposed to a hot one or having your bath with water that isn't hot adequate or perhaps too hot. Whatever the situation may be, hot water heater problems can be quite stressful. The good news is, we have actually made a listing of possible services to your water heater concerns. There are a variety of elements that could cause a lot of these troubles, maybe an issue with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you turn off the primary power supply for safety and security. Whatever the issue is, getting it repaired should not present way too much of a problem if you adhere to these steps:
Check Your Power Supply:
As basic as this might appear, it is extremely necessary. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power problem. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, just transform it off and on again. Replace any kind of busted or worn-out fuse. Examine the device with power after these adjustments to see if it's currently working.
Examine the Heating Element in the Water Heater:
If it's not a power issue, then attempt checking out your burner if it is still functioning. Test each of your burner to ensure the problem isn't with any of them. If any of them is malfunctioning, change that part and after that inspect whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot sufficient, you might require to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open up the access panel as well as press the red button for temperature level reset over the thermostat. This should help heat up the water. Turn the breaker back on and check if the problem has been solved.
Call A Specialist:
If after replacing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you might require to contact an expert plumber for a professional point of view. The trouble with your heater could be that the hot and cold taps have actually been switched over or it might be undersized for the amount of hot water needed in your house. Whatever the instance might be, a professional plumber would assist fix the trouble.
Conclusion
Water heater issues are not constantly significant. Many of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the damaged components should do the trick. However, if you are still not able to resolve the issue, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our piece about Hot Water Heater Repair. Thanks so much for taking time to read our piece of content. For those who enjoyed reading our post please do not forget to share it. Thank you so much for taking the time to read it.
We're here 24/7, call!